Need HASP or HASP HLor other DONGLE DUPLICATE ?

(hardware copy)

IF YOU do not know what kind of USB dongleyou have or something unclear

click here to identify it

if you know what you want

READ LPT (PRINTER PORT) TYPE HASP click here

read USB TYPE HASP click here

(c) 2018 MM Group.

HASP - Duplicators

Page was modified on12.11.2018

Dongleis a device to plug in to the LPT (or other) port. It is used to storesome information and to communicate with protected software. Ifsoftware can't find required dongle, it will not run properly. It'smain purpose copy protection. HASP (R) is a trademark name of donglesmanufactured by Alladin.

A:HASP wiring scheme is common for all HASP dongles. The unique is onlyfunctional and memory content inside the HASP chips. In case of Memo-x,NetHASP, TimeHASP, HASP36,HASP4 the PC talks to dongle via D0-D7 wires(pin 2 ..9 on D25 parallel port connector, in the case of LPT). Thedongle answers to PC via 'PaperEnd' (pin 12 ) wire. All other wires areused just to supply a power or switch it on/off.

Toanalyze HASP protocol yourself you will need logic state analyzer withat least 9 (better 12) channels. The sampling rate must be minimum 2times higher than your parallel port speed. Also it must have multipletriggering capability and enough memory.

Exampleof HASP logic state analysis here. and we will do it for you.

Thereare 3 ways to avoid you dongle:

1.Modify protected software - usually complicated and can causelost of some functionality of software. It is also illegal in many states.

2.Use HASP driver emulator is good way, but it does not always workperfectly, especially sensitive for upgrades and OS changes. Sometimesexpensive.

3.Make hardware duplicate of your original HASP. This is also good wayand there is no need to modify/create any software. If you do not wantto touch HASP protected soft due legal issues or worry tocause its proper operation - read below.

.

You will only need to read data of you HASP. But you don't have tosend a HASP to Us! (thisis usual question). Simply we will send you small program which in fewseconds will read all data from your HASP and write it to separatefile. This file you should send back to us and from supplied data wewill develop your HASP dongle replacement. And we can do a lot of them!!!

(this is only forprallel port dongles!)

Prepare empty floppy disk and run dowloaded Hasp4rdr.exe

app will ask you to insert

floppy and writes DOS boot files

and Hasp4 reader on it

RebootPC from this floppy.

Folowonscreen instructions & read your hasps data

Thenyou will get your HASP data file with all memory content an otherinternal settings saved in *.hsp file on the same floppy

Ifsomething unclear - contact us: dongle@nsys.by

E-maireceived hasp datafile

*.hsp

back to dongle@nsys.by

From this data we will develop twin of your HASP !!!!

something ???

MM Group

By Email : dongle@nsys.by

If you don't know them or don't know what they are -read how to get Hasp Passwords

If you know them - continue to reading sep by stepprocedure below.

1.

Nowwe have our hasp passwords ready and your hasp plugged.

Notethat from this point everything can be done on any PC.

Itis not need to have your protected application installed.

DownloadHasp reader archive: HaspHLrdr.zip(165kb)

2.

Createseparate folder for it. For example C:HaspHLrdr

3.

Unzipdownloaded archive in to this new folder. It is 3 file inside:

HaspHLrdr.exe,

Dongdupe.sys,

Dongdupe.inf

4.

Firstof all we need to install reader drivers. This is a standard OSprocedure as for any other hardware but for clarity it is illustratedbelow. Note that later driver can be removed in same way.

5.

Goto 'Start' => 'Settings' => 'ControlPanel' => 'System'

P.s Device Manager can also be reached in other ways.

13.

Atthe end is final screen saying that installation done. Select 'Finish'.

Herewe MUST Restart PC. In mostcases it will be the ask to do so from Windows, but if not - we sillneed to reboot now.

Run HaspHLrdr.exe enter your hasp passwords(in our example they was 3C39:25A0) and press 'Read'.

Wait few minutes until it tells that readingdone and data in to file saved. This data file with DMP extension savedin same to same folder where reader is. Find it and email to dongle@nsys.by

Any questions or something not works - write:

Email : dongle@nsys.by

Respond within 24 hours.